Printable Catalog with
Mintage Statistics for Items Designed and Minted by Daniel Carr / Moonlight
Mint.
Large Bronze
Castings by Daniel Carr
|
|
|
|
|
Obverse: “FALLEN ANGEL 09” (second design). Reverse: Blank, with support framing and ink stenciling. Size: 50 x 100 inches. Thickness: ~ 5 inches (with support framing). Finish: various patina. Quantity produced: 2. Date of production: 2015. Material: Flame-spray (hot molten bronze) over carved fiber board. Steel outer frame. |
|
|
|
|
|
Obverse: “DEFIANCE”. Reverse: Blank, with hand-cut signature. Size: 4.0 x 4.0 inches. Thickness: ~ 4mm. Finish: Antiqued. Quantity produced: 14. Date of production: 2015. Material: Bronze. |
|
|
|
|
|
Obverse: “FALLEN ANGEL 07”. Reverse: Blank, with hand-cut signature. Size: 3.5 x 7.0 inches. Thickness: ~ 4mm. Finish: Antiqued. Quantity produced: 12. Date of production: 2015. Material: Bronze. |
|
|
Obverse: “FALLEN ANGEL 09” (second design). Reverse: Blank, with hand-cut signature. Size: 3.5 x 7.0 inches. Thickness: ~ 4mm. Finish: Antiqued. Quantity produced: 12. Date of production: 2015. Material: Bronze. |
|
|
|
|
|
Obverse: “FALLEN ANGEL 09” (first design). Reverse: Blank,
stamped in small letters “BRONZE” with date Size: 2.0 x 3.25 inches (standard credit card size). Thickness: ~ 2.5mm. Finish: Antiqued. Quantity produced: 50. Date of production: 2012. Material: Bronze. |
|
|
|
|
|
Obverse: Tesla birth centennial medal concept. Reverse: Blank. Diameter: (2x) ~4 inches (on 6-inch square). Thickness: ~ 0.25 inches. Finish: Machined. Quantity produced: 1. Date of production: 2006. Material: Machined brass.
|
|
|
|
|
|
Obverse: Nevada state quarter concept. Reverse: Diameter: ~8.25 inches. Thickness: ~ 0.5 inches. Finish: Wire-brushed. Quantity produced: 1. Date of production: 2005. Material: Stainless steel. |
|
|
Obverse: Nevada state quarter concept. Reverse: Diameter: ~4 inches (on 6-inch square). Thickness: ~ 0.25 inches. Finish: Machined. Quantity produced: 1. Date of production: 2004. Material: Machined brass.
An additional piece (not shown) was made in 2004 by machining the design at 8 inches in diameter on a square aluminum plate. |
|
|
|
|
|
Obverses (as shown from top to bottom):
Astronaut Dollar concept; Bessie Coleman Dollar concept; Sacagawea Dollar concept; Eagle with “USA” Dollar concept; Eagle with “LIBERTY” Dollar concept.
Reverse: Blank, with logo cartouche and stamped edition number.
Diameter: ~8.375 inches. Thickness: ~ 0.25 inches. Finish: Wire-brushed. Quantity produced: One to three of each design. Date of production: 2004. Material: Bronze. |
|
|
|
|
|
Obverse: Astronaut Dollar concept. Reverse:
Blank, with hand-cut signature and Diameter: ~8.25 inches. Thickness: ~ 0.5 inches. Finish: Semi-matte with light patina. Quantity produced: 3. Date of production: 2004. Material: Bronze. |
Other items can be ordered by visiting www.dc-coin.com .